How to Run Ethernet Cable Along Wall

set up ethernet cable through wall Ethernet cables are a part of our everyday life. It is a cable that can be used to connect your PC or laptop to the internet or to another computer via the Ethernet port on each device. An Ethernet cable consists of four twisted pairs of copper wire covered in the plastic sheathing. They get their name from the way they look in cross-section with all the twists.

How to run Ethernet cable along Wall: Step by Step Process

Running the Ethernet cables along with the Wall is not a difficult task. You will need to consider the following while doing that:

  • The types of cables you’re using, and how long your cable runs will determine the type of Ethernet cable you will use (Category 5, 5e or 6) and what outlets you’ll be plugging into. You can buy cables in varying lengths, and you might want to buy a few different sizes. Remember, while running the cable along with the Wall, you also need to leave some slack so that when you unplug an item from the wall outlet, it’s not pulling on your cables.
  • The other important thing you need to know is that not all wall surfaces can be penetrated with electrical cables. For example, suppose you want to run the cable along with a wooden panel, brick or even metal wall surface. In that case, you will find it very difficult and dangerous for your cables because these walls can easily damage your cables. You should think well before deciding what type of Wall you’re going to run your cables so that you don’t need to face any problems in the future.

Now we will learn how we can run an Ethernet cable along a wall:

Step 1: Measure and Cut Your Cable:

The first step towards running your cable along the Wall is measuring and cutting your cable. You can buy a big 100 feet or even more Ethernet cable, but if you’re running it along the Wall, then you might find it challenging to move around. Therefore, it is recommended that you cut your cable into two parts; one part will be used to connect one device, and another part will be used to connect the other device. It is better to have two shorter cables rather than one long cable that can cause problems for you while running it along the Wall.

Step 2: Stick Adhesive Cable Clips Above and Below Your Outlet Boxes:

After measuring your cable, now it’s time to attach adhesive clips above and below your outlet boxes. Ensure that the clips are spaced far enough to provide enough room for running your cable along with the Wall. If you’re using a 3-outlet power strip, you should consider attaching two adhesive clips above and below each outlet box because it has three boxes, unlike an ordinary power strip that only has one box.

Step 3: Stick Adhesive Cable Clips to the Wall Surface Right under Your Outlet Boxes:

Now it’s time to attach adhesive clips on the Wall right below your outlet boxes. You need to make sure that these clips are attached near enough so that you’ll be able to run your cable along the Wall without any problem.

Step 4: Attach the Cable to the Adhesive Clips you’ve already attached on the Wall:

You can now attach your cable to the adhesive clips you’ve already attached to the Wall. Ensure that you’re running it right along with the Wall and not in front of or behind it because it makes it difficult to attach your cable.

Step 5: The Final Step is Connecting Your Cable to the Wall Socket:

The final step is connecting your cable to the wall socket. You may now plug in your device and enjoy high-speed internet!

Ensure that you don’t cross over the cables by stepping over them as this may cause damage to your cables. If you’re buying a long Ethernet cable, you should ask for connecting clips because they help reduce the chances of tangling your cables, making your work much easier and faster!

Check Also

daily routine of a smart automated home list

What is the Daily Routine of the Automated House

The automated house revolves around the idea of a smart home. A smart home is …